Bond Fund Duration and Yield: Effective Duration, SEC Yield and Yield to Worst

A bond fund's fact sheet reports several measures of what the portfolio adds up to, and three of them come up in almost every review: effective duration, the 30-day SEC yield and yield to worst. Each answers a different question. Effective duration estimates how much the fund's value would move if interest rates shifted. The SEC yield reports what the fund earned over a recent 30-day window, calculated the same way by every fund that quotes it. Yield to worst estimates what the bonds in the portfolio would return if every issuer exercised its options in the way least favorable to the holder.
The earlier guides in this series covered where fund holdings come from and how to combine them across funds. This one covers what those holdings add up to for a bond fund. It explains how each measure is defined and calculated, why the three can point in different directions for the same fund, and what risk teams, due diligence analysts and wealth platforms should check before relying on a reported figure.
Effective duration: how much the fund moves when rates move
Duration measures how sensitive a bond's price is to a change in interest rates. FINRA's investor guidance gives the rule of thumb: for each 1 percentage point change in rates, a bond's price moves in the opposite direction by roughly its duration number, so a duration of 10 implies a decline of about 10% if rates rise by one point. A bond fund's duration works the same way at the portfolio level, as the market-value-weighted sensitivity of everything the fund holds.
There is more than one way to calculate that sensitivity. Modified duration starts from a bond's scheduled cash flows and its yield, and measures how much the price changes for a small change in that yield. It works well for a plain fixed-rate bond whose coupons and maturity date stay the same whatever rates do. Many bonds are built differently. A callable corporate or municipal bond can be redeemed early when rates fall, and a mortgage-backed security pays down faster when homeowners refinance. For those holdings the cash flows themselves depend on where rates go, so a measure built on fixed cash flows overstates how much the price would gain in a rally.
Effective duration handles this by repricing the bond under shifted rate scenarios. A pricing model values the bond with rates moved down and up by the same small amount, lets calls, prepayments and other options respond in each scenario, and takes the duration from the difference between the two prices:
Here P0 is the current price, and P- and P+ are the model prices after rates fall and rise by Δy. Because the result depends on a model, effective duration is also called option-adjusted duration, and two providers can report different figures for the same bond when their call or prepayment assumptions differ.
The gap between the two measures is widest where options matter most. A callable bond trading above its call price behaves more like a short bond, because the issuer is likely to redeem it early, so its effective duration sits well below its modified duration. Mortgage-backed securities show negative convexity: as rates fall, prepayments speed up and duration shortens just when a holder would want it to lengthen. A fund with large positions in either will report an effective duration that differs noticeably from a calculation based on stated maturities.
At the fund level, effective duration can also reflect positions that hold no bonds at all. Many bond funds use Treasury futures or interest rate swaps to lengthen or shorten duration without trading the underlying bonds. Those derivatives carry duration of their own, and fund-reported figures usually include them, so the reported number can differ from a duration calculated from the cash bonds alone. When comparing a fund's reported duration with an independent calculation, the first question is whether both cover the same positions.
The 30-day SEC yield: a standard formula for what the fund earns
The 30-day SEC yield exists so that investors can compare bond funds on the same footing. Form N-1A, the registration form for mutual funds and most ETFs, sets out the method a fund uses when it includes a yield in its prospectus, and funds restate that method in their statements of additional information. The calculation takes the fund's net investment income over a 30-day period, divides it by the share price on the last day, and annualizes the result:
In the formula, a is dividends and interest earned during the period, b is expenses accrued for the period net of any reimbursements, c is the average daily number of shares outstanding that were entitled to receive dividends, and d is the maximum offering price per share on the last day of the period, as fund SAIs such as this one set it out. Compounding the 30-day rate six times and doubling it produces an annual rate on the same semiannual basis that bond yields use.
The detail that makes the SEC yield useful is how it counts interest. For debt holdings, income is computed from each bond's yield to maturity at its current market value, so a bond bought at a premium contributes less income than its coupon suggests, because the premium is amortized away. Capital gains and losses are left out. The result is closer to what the portfolio is currently earning, after expenses, than any figure based on coupons or past payouts.
Two inputs can move the number without any change in the portfolio. The first is expenses. Because b is net of reimbursements, a fund whose adviser is waiving fees reports a higher SEC yield than it would without the waiver, and many fund families publish both a subsidized figure, which reflects the waiver, and an unsubsidized figure, which does not. The gap can be large: one multi-asset fund's 2017 annual report showed a subsidized SEC yield of 3.60% for its Class A shares against an unsubsidized 0.78%. When a waiver expires, the unsubsidized figure is the better guide to what remains. The second is the offering price. For share classes with a front-end sales charge, d is the maximum offering price including the load, so the quoted yield for those shares is lower than what an investor who paid a reduced load or none would earn.
The SEC yield also differs from the distribution yield a fund may quote, which annualizes the most recent distribution and divides it by the share price. A fund can distribute more or less than it currently earns, and the distribution yield usually ignores premium amortization, so the two figures can diverge for the same fund in the same month. The SQX Alts glossary entry on distribution rate covers how payout-based yields are built. For comparing what two bond funds are earning today, the SEC yield is the more consistent of the two.
Yield to worst: the conservative yield on the portfolio
Yield to worst starts at the level of a single bond. The MSRB's guide to municipal bond basics defines it as the lowest yield a bond can produce once its call or early redemption provisions are taken into account. In practice, the calculation works out the yield to maturity and the yield to each possible call date at the bond's current price, and reports the lowest. The MSRB also notes that yield to worst is the yield that must appear on a municipal investor's trade confirmation, which is one reason the measure is so common in fixed income.
Which date produces the worst yield depends mostly on price. For a bond trading at a premium, the earliest call usually gives the lowest yield, because the holder has less time to earn back the premium before the bond is redeemed at par or close to it. For a bond trading at a discount, yield to maturity is usually the worst case, because an early call would return par sooner and raise the yield. That makes the gap between yield to worst and yield to maturity a quick signal of how much of a portfolio sits in callable bonds priced above their call prices.
Why yield to worst follows the call when a bond trades above par
Yield to maturity and yield to call at different prices for a hypothetical 10-year bond with a 5% coupon, callable at par in three years. Yield to worst is the lower of the two at each price.
Source: SQX calculation. Hypothetical bond with semiannual coupons and a single call date; yields are bond-equivalent. Bonds with several call dates or a call price above par give different numbers, with the same pattern.
A fund's yield to worst is usually the market-value-weighted average of the yields to worst of its bond holdings. It reads as a portfolio characteristic and carries several assumptions with it: every issuer pays as scheduled, each bond is held to its worst-case date, and coupons are reinvested at the same yield. Fund-reported figures are typically stated before fund expenses, which sets them apart from the SEC yield, and they say nothing about defaults. For a high yield fund, where many bonds are callable and credit losses are part of the return, yield to worst describes what the portfolio offers before credit losses, and expected losses still need to be subtracted to estimate what it will earn.
Some holdings need different treatment. Mortgage-backed securities have no single call date, so their yields are calculated from projected prepayment speeds. Floating-rate notes reset with a reference rate, so their yields depend on an assumed path for that rate. A fund-level yield to worst blends these different methods into one number, which is another reason to know what the fund holds before comparing its figure with a peer's.
Reading the three measures together
The three measures are built for different jobs, and most apparent contradictions between them come from those design differences.
Effective duration measures how much the fund's value moves for a 1-point change in rates. It reflects calls and prepayments through the pricing model behind it, and it usually comes from the fund's fact sheet, calculated by the fund or its analytics provider.
The 30-day SEC yield measures what the fund earned over the last 30 days, annualized. It is the only one of the three stated after fund expenses, with subsidized figures reflecting any waivers, and it picks up calls only indirectly, through each bond's yield to maturity. Funds report it in the prospectus, fact sheet or shareholder report under the Form N-1A method.
Yield to worst measures what the bond holdings would yield if every issuer redeemed at the date worst for the holder. It accounts for calls directly through each bond's call schedule, is usually stated before expenses, and appears on the fund fact sheet as a calculation across the holdings.
A few patterns account for most of the gaps a reviewer will see. In a fund with many callable bonds trading above their call prices, yield to worst falls below yield to maturity, and the SEC yield can sit above yield to worst after expenses because the standard method computes income from each bond's yield to maturity. The same fund's effective duration will be shorter than a calculation based on stated maturities, because the model expects many of those bonds to be called.
A fund with a fee waiver shows a different gap. Its subsidized SEC yield is higher than its holdings and full expense ratio alone would produce, and the unsubsidized SEC yield shows what the investor keeps once the waiver ends. A fund that manages duration with futures or swaps can report an effective duration well away from anything its cash bonds would suggest, longer or shorter depending on the overlay.
A rough cross-check follows from these relationships. For a plain fixed-rate bond fund, yield to worst minus the fund's expense ratio should land somewhere near the SEC yield. When the two are far apart, the usual explanations are a fee waiver, a large premium-bond position, a derivatives overlay, a sales load in the offering price, or figures taken on different dates. The check is a starting point that tells a reviewer where to look first.
What to check before comparing funds
Comparing duration and yield across a list of funds means comparing numbers produced by different people, on different dates, with different methods. Four checks catch most of the problems.
The first is the date. Fund sponsors typically update fact sheet statistics monthly or quarterly, and the as-of date on one fund's effective duration may be weeks away from another's. In a period when rates move quickly, a month is long enough to change both duration and yield. Any comparison should line up the dates first, or at least record them next to the figures.
The second is the method. Effective duration from one sponsor and effective duration from another may rest on different prepayment models and call assumptions, and some sponsors publish modified duration or option-adjusted duration under the same heading. Yield to worst can be calculated on market value or on a different weighting, with or without cash. When a fund's figure looks out of line with its peers, the footnote on the fact sheet usually explains which version it is.
The third is what the calculation includes. Cash and money market positions carry almost no duration and pull the average down. Derivatives can push it either way. A holdings-based calculation that leaves out futures will disagree with a sponsor figure that includes them, and both can be correct for what they measure.
The fourth applies to any independent calculation built from holdings: coverage. As the guide on Form N-PORT and the holdings lag explained, public holdings can be weeks or months old, and some positions in a portfolio will lack the identifiers or pricing analytics needed to compute a duration or yield. A fund-level figure based on 95% of the portfolio by weight means something different from one based on 60%. The share of the portfolio behind each measure should travel with the measure.
How SQXray measures bond fund exposure
SQXray calculates fixed income measures for each fund from the fund's own holdings, giving teams an independent view to set beside the figures a sponsor reports. Starting from the most recent portfolio available for the fund, it computes modified duration, convexity, yield to maturity, yield to worst, average coupon, average maturity, average price and average credit quality across the bond holdings.
Each measure comes with the context needed to judge it. Every figure carries its own coverage percentage, showing how much of the portfolio by weight stood behind that calculation, along with the date and source of the holdings it was built from and the dates of the bond-level analytics it used. A risk team can set a minimum coverage level for its own use, and an analyst can see at once whether a fund's duration rests on a current portfolio or an older one. The measures are recalculated each business day as new holdings and analytics arrive.
Because the duration SQXray reports is modified duration, it will differ from a sponsor's effective duration for funds with large callable or mortgage-backed positions, for the reasons covered earlier in this guide. That difference is useful information in itself: a wide gap between a holdings-based modified duration and a reported effective duration points to option-heavy holdings or a derivatives overlay worth a closer look. Derivatives and cash stay in each portfolio as the source reports them, so a team can apply its own treatment.
The same holdings feed the rest of the dataset, including the exposure, overlap and liquidity measures covered earlier in this series and the fund-level fields on fees, managers and proxy votes. SQX delivers SQXray files by SFTP or Amazon S3, so the measures load directly into the risk, due diligence and platform systems where teams already compare funds.
From yield to cost
The gap between a subsidized and an unsubsidized SEC yield is a reminder that a fund's expenses come straight out of what its holdings earn. Gross and net expense ratios, fee waivers and their expiration dates, 12b-1 fees and acquired fund fees all shape how much of a portfolio's yield reaches the investor, and they vary widely across share classes of the same fund. How each of these costs is defined, and how to benchmark a fund's fees against a fair peer group, is the subject of the next guide in this series.
Check the numbers behind your bond funds
Send SQX the list of bond funds you hold, cover or accept as collateral, and we will return SQXray's holdings-based duration, yield and credit measures for each one, with the coverage, holdings date and source behind every figure, so your team can set them beside the numbers sponsors report. Tickers or CUSIPs are fine.
Contact us at inquiries@sqx.com or (630) 870-1101, or visit the SQXray product page to see the full set of fields.
For more SQX news,
follow SQX
on LinkedIn and subscribe to our
LinkedIn
newsletter to stay ahead of the curve.




